Globhy
AllBusinessHealthMarketingTechnologyTravelUncategorized
Posted on 8 minutes agoEdited on 8 minutes ago

Share:

Zip Lock Bag Sizes and Micron Guide for Australian Businesses

Zip Lock Bag Sizes and Micron Guide for Australian Businesses

Which zip lock bag micron do you need? Compare 40µm, 50µm and 75µm on strength and use, plus how bag sizes are measured. Wholesale supply Australia-wide.

Zip lock bags look interchangeable in a catalogue. Two bags of the same dimensions can behave completely differently in use, because the gauge of the film decides whether the bag holds its contents or splits at the seal. Order too light and you get burst bags, spilled stock and repacking. Order heavier than the job needs and you are paying for film your contents never required.

This guide sets out what each gauge is built for, how zip lock bag sizes are measured, and how to land on the right specification before you place a bulk order. It is written for procurement teams, warehouse and dispatch managers, and anyone buying resealable bags for a commercial operation.

What Micron Actually Measures

Micron, written as µm, is the thickness of the film the bag is made from. One micron is one thousandth of a millimetre, so a 75µm bag is roughly half as thick again as a 50µm bag. Higher gauge film resists puncture and tearing better, holds more weight without stretching at the seal, and stands up to repeated opening and closing.

Zip lock bags are also sold as press seal, preseal, resealable, clipseal and snap lock bags. The names differ by supplier; the specification does not: what you are buying is a low-density polyethylene bag with an interlocking press closure, described by its two dimensions and its gauge.

40µm: Light Duty

Forty microns is the entry gauge. The film is noticeably thin and flexible, which suits small, light, smooth contents that are packed once and not handled much afterwards. It is commonly used for displaying or storing large quantities of very small items where the bag is a holder rather than a protective layer.

The limitation is that it punctures and tears readily. Anything with a corner, a thread or a sharp edge will find a weakness, and the seal can pull open under weight. It is also not the gauge for bags that will be opened and closed many times, because the closure wears faster on thin film.

Best for: small, light, smooth-edged items such as beads, buttons and small components; short-term storage; sorting and kitting where the bag is simply holding a count together.

50µm: The Commercial Standard

Fifty micron is the working gauge for most commercial applications, and it is where the majority of business orders land. It is thick enough to hold weight without stretching at the seal, resist everyday handling and survive repeated opening and closing, while staying flexible and easy to pack. Press seal bags in 50µm cover the broadest range of day-to-day uses, from small parts through to larger retail and storage applications.

If you are not sure which gauge to order and your contents are not especially heavy or sharp, 50µm is the sensible default. It is the gauge most operations standardise on so that one specification covers the bulk of their packing.

Best for: general warehouse and dispatch packing, small parts and hardware, pharmacy and dispensing, food pre-portioning, sample packs, retail packing and repackaging, and anything opened and resealed regularly.

75µm: Heavy Duty

Seventy-five microns is the heavy-duty gauge, built for contents that would defeat a lighter bag. The extra thickness gives real puncture and tear resistance, holds heavier contents without the seal pulling apart, and withstands repeated handling and longer freight legs. Heavy duty press seal bags in 75µm are stocked in twelve sizes, running from 50mm x 50mm up to 380mm x 510mm, so the gauge is available across both small parts and bulkier contents.

Choose it whenever the contents have weight, sharp edges or abrasive surfaces, or when the bag will be handled repeatedly before it reaches its destination. Fixings, fasteners, metal components, tooling and machined parts are the usual candidates.

Best for: fixings, fasteners and hardware; metal components and machined parts; sharp or abrasive contents; heavier fills; long freight legs and bags handled many times.

40µm vs 50µm vs 75µm at a Glance

Gauge

Film character

Handles

Typical applications

40µm

Thin and flexible, punctures easily

Light, smooth, packed once

Beads, buttons, small components, short term storage

50µm

Balanced, holds weight, reseals well

Everyday commercial contents

Small parts, pharmacy, food portioning, retail packing

75µm

Thick, puncture and tear resistant

Heavy, sharp or abrasive contents

Fixings, hardware, metal components, tooling

How Zip Lock Bag Sizes Are Measured

Sizes are given as two dimensions in millimetres: the width of the opening first, then the length. The length is measured from the seal down to the bottom of the bag, so the zip strip itself sits above that measurement. This matters when you are ordering, because a bag quoted at 150mm x 230mm gives you 230mm of usable depth below the closure rather than 230mm overall.

Two practical rules keep the order right. Allow a little more width than the widest point of your item, since contents need to sit flat rather than stretch the film at the seal. And allow enough depth that the contents sit below the zip, because a bag filled to the closure will not seal reliably and will work open in transit.

Choosing the Right Size and Gauge

Work through four questions before you order:

Share:

More in Business

View category