Share:

Zip Lock Bag Sizes and Micron Guide for Australian Businesses
- What is going in it? Smooth and light points to a lighter gauge. Sharp, heavy or abrasive points to 75µm.
- How often will it be opened? Repeated access wears a thin closure, so step up the gauge for bags that are resealed often.
- How far does it travel and how is it handled? Longer freight legs and more touchpoints justify a heavier gauge.
- Does the contents need to be visible or written on? Clear film suits picking and identification, which matters for parts and dispensing.
A practical test on your current bags: if any are splitting at the seal, bursting in transit or working open before they arrive, the gauge is too light for the job rather than the bags being faulty.
Matching the Gauge to Your Industry
Industry | Common use | Usual gauge |
Hardware and industrial distribution | Fixings, fasteners, components, kitting | 75µm |
Warehousing and dispatch | Small parts, spares, picking and sorting | 50µm |
Pharmacy and healthcare | Dispensing, sample and specimen packing | 50µm |
Food service and food retail | Pre-portioning and ingredient storage | 50µm, food grade |
Retail and eCommerce | Accessories, repackaging, multipacks | 50µm |
Jewellery and small goods | Beads, findings, very small items | 40µm to 50µm |
Food Grade and Compliance
If bags will hold food, confirm the film is a food-grade specification before ordering, and keep that documentation on file for your own food safety system. Resealable bags are widely used for pre-portioning and ingredient storage in food service, but food contact suitability is a specification question that should be confirmed for the exact product you are buying rather than assumed from the material.
Buying in Bulk Without Overspecifying
The most common ordering mistake is running one gauge across everything. Operations that pack both light retail items and heavy fixings usually do better holding two gauges, a 50µm for general packing and a 75µm for the demanding lines, than forcing one specification to cover both. Browse the zip lock and preseal bag range to compare the stocked gauges and sizes. Where contents are heat sealed rather than resealed, or where a bag is opened only once, plain poly bags are the better and simpler specification.
Zip lock bags sit within the wider plastic packaging range, so most operations reorder them alongside their other bag lines on the same cycle.
Sustainability Considerations
Specifying correctly is the most direct way to reduce plastic use. A bag matched to its contents uses the least film that will still do the job, while an over-specified gauge puts more plastic into every pack for no gain. Low density polyethylene bags can also enter commercial soft plastic recycling streams rather than going to landfill, so reviewing both gauge and size across your most-used lines is a practical step toward lower material use.
Order Zip Lock Bags Through Premium Packaging
Premium Packaging supplies resealable zip lock and press seal bags to Australian businesses in wholesale carton quantities, in the gauges and size ranges commercial operations actually use. Our team can confirm the right specification for your contents rather than leaving you to guess from a size chart, and custom sizes and gauges can be arranged where the stocked range does not fit. Start with 50µm press seal bags for general packing or 75µm heavy duty for demanding contents.
Orders ship from our Werrington warehouse in Western Sydney to businesses nationwide, and we can set up recurring supply for lines you reorder on a cycle. Further buying guidance is published on the Premium Packaging blog.
Frequently Asked Questions
What micron zip lock bag do I need?
It depends on the contents. Light, smooth items suit 40µm, everyday commercial packing suits 50µm, and heavy, sharp or abrasive contents call for 75µm. If you are unsure and the contents are not demanding, 50µm is the sensible default.
Is a higher micron always better?
No. A heavier gauge adds material and uses more plastic without any benefit on light, smooth contents. The aim is to match the gauge to the weight, edges and handling the bag will actually face.
How are zip lock bag sizes measured?
Sizes are listed as width of the opening by length in millimetres, with the length measured from the seal down to the bottom of the bag. The zip strip sits above that measurement, so allow depth for contents to sit below the closure.
What is the difference between zip lock bags and press seal bags?
They are the same product under different trade names, along with preseal, resealable, clipseal and snap lock. All describe a polyethylene bag with an interlocking press closure, specified by its two dimensions and its gauge.
Why do my zip lock bags keep splitting at the seal?
Usually the gauge is too light for the contents, or the bags are overfilled so the film stretches at the closure. Step up to a heavier gauge, or move to a larger size so contents sit below the zip.
Know more https://premiumpackaging.com.au/blog/zip-lock-bag-sizes-micron-guide
Share:
More in Business
View category
How to Choose the Right Steam Boiler Manufacturers for Your Industrial Requirements
Selecting the right industrial boiler requires careful evaluation of capacity, fuel type, efficiency, safety and maintenance requirements. A suitable system not only meets present steam demands but also supports future production needs. Before partnering with Steam Boiler Manufacturers, businesses should understand their actual process requirements and compare available boiler technologies. Steamax Energy India provides industrial boiler solutions backed by design, supply, erection and commissioning capabilities. Contact the team to discuss your steam generation requirements and explore a suitable boiler solution for your industry.
READ ARTICLE
Pre Engineered Buildings Manufacturer: Complete Guide
Explore PEB construction, manufacturing processes, key benefits, applications, and tips for choosing the right pre engineered buildings manufacturer.
READ ARTICLE

How Organizations Can Build a Talent Pipeline for Hard-to-Fill Positions
Every company has a few roles that stay open for months. They need rare skills, deep experience, or a special mix of both. While the seat stays empty, work slows down and teams feel the strain.
READ ARTICLE