Electric Actuated Control Valve Manufacturer in Saudi Arabia

Analyzing the Difference: The controller compares the detected value with the desired set point.

Taking Action: Based on the variance, the controller sends a signal to the control valve.

Adjusting the Flow: The valve's actuator adjusts its position based on the signal received, regulating fluid flow.

Control valves vary in types and features to suit different applications:

Valve Body Types: Globe valves for throttling, angle valves for changing flow direction.

Actuator Options: Pneumatic, electric, or hydraulic actuators based on power source and environmental conditions.

Trim Materials: Internal components resist corrosion, erosion, and wear for durability.

Flow Characteristics: Valves offer linear, equal percentage, or quick opening flow rates for varied control behavior.

Working of 3 way converging and diverging control valve:

In a converging valve configuration, the two outlet ports are smaller in size than the inlet port. This causes the fluid or gas to converge as it passes through the valve, increasing the pressure and velocity of the flow. This type of valve is often used in applications where high flow rates and low pressure drops are required.

In a diverging valve configuration, the two outlet ports are larger in size than the inlet port. This causes the fluid or gas to diverge as it passes through the valve, decreasing the pressure and increasing the flow rate. This type of valve is often used in applications where low flow rates and high pressure drops are required.

The common port is connected to the process piping system and the inlet port is connected to the upstream line. The two outlet ports are connected to the downstream lines. By adjusting the position of the plug, the flow rate through the valve can be regulated to maintain a desired process condition.