Share:

ADA Parking Striping: A Complete Guide to Accessible Parking Lots
What property owners should know about ADA parking striping: accessible stall counts, van-accessible aisles, symbols, signage, routes and maintenance.
Accessible parking is one of the most visible signs that a property welcomes everyone. It is also one of the most common sources of accessibility complaints when it is done poorly. ADA parking striping covers the stalls, access aisles, symbols and routes that allow people with disabilities to park and reach a building safely. This guide explains the key elements, common mistakes and how to keep accessible parking compliant over time.
Why ADA Parking Striping Matters
The Americans with Disabilities Act sets accessibility standards for public accommodations and commercial facilities, including parking. Properly marked accessible spaces help wheelchair users, people with mobility devices and others with disabilities park close to entrances and move safely from their vehicles. Beyond compliance, clear accessible parking shows customers, tenants and employees that the property takes their needs seriously.
The Key Elements of Accessible Parking
Accessible Parking Spaces
Accessible stalls are typically located on the shortest accessible route to an accessible entrance. They are marked with lines and the International Symbol of Accessibility, and they are identified by signs mounted at a height where they remain visible when a vehicle is parked.
Access Aisles
Access aisles are the striped areas next to accessible stalls that give people room to deploy ramps, lifts and mobility devices. They must be marked to discourage parking and must connect to an accessible route. Two accessible stalls can often share one access aisle.
Van-Accessible Spaces
A portion of accessible spaces must be van accessible, with a wider stall or wider access aisle to fit side-mounted lifts and ramps, plus adequate vertical clearance where parking is covered. These spaces need their own signage identifying them as van accessible.
Accessible Routes
The route from the accessible stalls to the entrance should be firm, stable, slip resistant and free of steps. Curb ramps, marked crosswalks and level landings all help. Routes should avoid forcing people to travel behind parked cars where possible.
How Many Accessible Spaces Do You Need?
The required number of accessible spaces depends on the total number of parking spaces in the lot, following a scale set out in the ADA Standards for Accessible Design. Medical facilities and certain other uses may require more. Because state and local codes can add their own requirements, it is wise to confirm the current rules for your jurisdiction before restriping or redesigning a lot.
Common ADA Striping Mistakes
- Access aisles that are too narrow or not marked clearly
- No van-accessible space, or no sign identifying one
- Accessible stalls placed far from the accessible entrance
- Faded symbols and lines that are hard to see
- Signs mounted too low or blocked by vehicles
- Slopes in the stall or aisle that make transfers difficult
- Curb ramps blocked by parked cars or missing entirely
Planning a Compliant Layout
The best time to get accessible parking right is during layout design, whether for a new lot or a full restripe. A professional layout considers entrance locations, slopes, drainage, traffic flow and the total space count. Accessible stalls and aisles are positioned first, then the remaining stalls are arranged around them. Fire lanes, crosswalks, directional arrows and loading zones are added to keep traffic organized.
Paint, Symbols and Visibility
Accessible symbols and access aisle hatching must stay visible to work. High-quality traffic paint, proper surface preparation and correct application thickness all help markings last. Many properties use blue for accessible stalls and symbols, although local rules may vary, so check what applies in your area.
Maintenance and Restriping
Markings wear out with traffic, weather and snow removal. Faded accessible markings can create compliance problems and confusion for drivers. Include accessible parking in routine inspections and restripe before markings fade. Re-check signage at the same time, replacing damaged or missing signs.
When to Review Your Accessible Parking
- After repaving, resurfacing or sealcoating
- When the lot layout or building entrances change
- When the total number of spaces changes
- When markings or signs are faded or damaged
- After receiving feedback from visitors or tenants
Share:
More in Business
View category
How to Choose the Right Epoxy Flooring for Your Property
Explore how to choose the right epoxy flooring for your property by comparing finishes, durability, safety, maintenance and installation requirements.
READ ARTICLE
Musical Instruments: A Complete Guide to Choosing the Right Gear
A practical guide to choosing musical instruments, from acoustic, electric and bass guitars to amps and practice gear, for beginners and returning players.
READ ARTICLE
How German SMEs Can Assess Their Digital Maturity Before Investing in New Software
Assess your digital maturity to identify technology gaps, improve business processes and make informed software investment decisions.
READ ARTICLE
Switching Off in the Hills: Why Coorg Is Made for the Unplugged Retreat
Discover why Coorg’s quiet estates, cool air and slow rhythm make it the ideal setting for a restful, unplugged retreat.
READ ARTICLE