A mobile roadworthy Brisbane certificate is more than just a piece of paper—it’s a reflection of your vehicle’s safety and legal compliance on Queensland roads. If you’re planning to sell your car, transfer registration, or re-register an unregistered vehicle, you’ll need this certificate. But how can you tell if your car is roadworthy before booking an inspection?
We are committed to keeping you safe and informed. Here are the top signs your car may not be roadworthy—and what you can do about them.
Tyres are a critical component of vehicle safety. If your tyres are bald, worn unevenly, or below the legal tread depth of 1.5mm, your car may fail the roadworthy test. Cracks, bulges, and exposed cords are also red flags.
Check your tyre tread using a tread depth gauge or the "coin test." Replace tyres if they’re worn or showing signs of damage.
All exterior lights must be working correctly, including headlights, brake lights, reverse lights, and turn signals. Dim, flickering, or non-functional lights are a common reason for car roadworthy Brisbane failure.
Please have someone help you check each light while you activate it. Replace blown bulbs and ensure lenses are clean and free from cracks.
Brakes that squeal, grind, or feel unresponsive when pressed are a serious safety hazard. A vehicle with brake issues is unlikely to pass a roadworthy inspection.
If you suspect brake problems, visit a mechanic immediately. You may need new pads or discs or a brake fluid top-up.
A damaged windscreen—especially in the driver’s field of vision—can obstruct your view and lead to roadworthy failure. Even small cracks can proliferate and compromise safety.
If the damage is minor and not in the line of sight, repairs may be sufficient. Otherwise, a complete replacement might be necessary.
Surface rust isn’t usually a problem, but structural rust or sharp edges from damage can affect the integrity and safety of your vehicle.
Inspect your car for rust near seatbelt mounts, the undercarriage, and door frames. If necessary, consider professional rust treatment or panel repairs.
A car that pulls to one side, feels unstable, or makes knocking noises over bumps could have worn suspension components or steering issues. These can impact your control and stability on the road.
Get a suspension check from a licensed mechanic. Replacing worn bushings, shocks, or ball joints may be required.
Visible oil, coolant, or transmission fluid leaks under your car—or blue/white smoke from the exhaust—are warning signs of mechanical issues that can lead to a failed car safety certificate Brisbane inspection.
Address any leaks or smoke as soon as possible. Regular servicing helps prevent major issues from developing.
· Conduct a Pre-Inspection Check:
Look for the signs listed above and make a checklist.
· Get Repairs Done Promptly:
Fix obvious issues before booking your official roadworthy inspection.
· Book a Professional Inspection:
We offer mobile car roadworthy certificate inspections across Logan and surrounding areas, so you can get certified without leaving your home or office.
· Fast & Convenient Mobile Service
· Licensed Inspectors with Years of Experience
· Competitive Rates
· Servicing Logan, Brisbane Southside, Gold Coast & Beyond
· Friendly, Transparent, and Honest Assessments
Whether you're buying, selling, or re-registering a vehicle, Sunshine Roadworthy is your trusted partner for fast and reliable mobile roadworthy Brisbane. Don’t risk delays or legal issues—make sure your car is roadworthy before hitting the road.